Anti-detachable ceramic label is our company specially designed for vehicle management anti-detachable and destroy electronic label, using microwave ceramic medium design is in full compliance with international ISO 18000-6C ISO18000-6B standard. Its operating frequency is UHF (860-960 MHZ). The label is mainly applicable to urban intelligent traffic management, highway no parking charge, customs vehicle access management, intelligent community parking lot and other fields. This high performance, stable and reliable tag has a very wide band for multiple countries and regions, in addition to
excellent speed adaptation performance.
Excellent readout performance can be obtained when detachable ceramic label is combined with automobile glass. The label uses composite ceramic inside, with high temperature resistance, stable performance and other characteristics.Once the detachable ceramic label is removed from the windshield of the vehicle, the label immediately becomes invalid and cannot be used again, thus preventing the illegal removal of the label.
RFID ceramic label "Anti-tear label" "UHFRFID Label" "UHF ceramic electronic label" typical application occasions are
☆ Logistics and warehousing management: goods flow and warehousing management as well as mail, parcels, transportation baggage flow management;
☆ Intelligent parking lot management: parking lot management and vehicle management and charging automation;
☆ Production line management: production process fixed point identification;
☆ Product anti-counterfeiting detection: use the label memory write protection function, to identify the authenticity of the product;
☆ Anti-cheating weighing system: to weigh the vehicle to identify the weighing vehicle information, especially unguarded value weighing system;
☆ Transport vehicle management: bus station announcement, parking management; Sand truck, mud truck and other vehicle transport times identification
and other management;
☆ Management in other areas: such as conference check-in, club VIP, library, student status, consumption management, attendance management, dining
management, swimming pool management and other systems have been widely used.
Install and use
Detachable ceramic label Transparent double-sided adhesive is used for installing labels on glass surfaces. With excellent bonding strength and good
packaging performance, it can replace some traditional mechanical connection methods and play a role of structure fixing. In addition, the label also
has uv resistance, solvent resistance, adapt to a wide temperature range and other characteristics, even at 70℃ high temperature, still maintain normal
bonding strength, and suitable for a certain radian surface installation, can be used outdoors. If the protective film of the double-sided tape on the
back of the label is removed, the label can be firmly attached to the windshield, but it will be very difficult to remove. The double-sided adhesive
does not pollute the window glass after removal, and can be used for the installation of anti-theft labels.
Packaging material: ceramic
Operating temperature: -40℃ ~ +85℃
Operating frequency: 860~960MHz
Meet the standard: ISO 18000-6C
Read distance: 0 to 10m depends on the gain of the reader antenna or the operating environment
Available data area: 916 bytes
Unique identifier (UID) : 64 bits
Working mode: R/W (read/write)
Data retention time: > 10 years
Repeatable erasing times: 100,000 times
Anti-collision mechanism: Suitable for multi-label reading
Size: 86mm × 54mm ×3.5mm(including glue)